Plastic to Fantastic Barbie Accessory Makeover Set One DIY Before & After
Decor, DIY

From Plastic to Fantastic: Barbie Accessory Makeover

As you’ve undoubtedly noticed by now, I like buying custom pieces for my dioramas (here and here).  I find they add a dash of realism to Eve’s world, while simultaneously offering a little support to the skilled artisans that create them.  That being said, custom pieces, or even pieces that don’t rely heavily on plastic, can be quite expensive.  For those that prefer to be a bit more frugal, you can transform your generic, plastic pieces with a quick, budget-friendly makeover.  The items I’m up-cycling in this post are all small, but this method works with larger furniture pieces as well.

What you need:
* Cardboard for your work surface.  It’s easy to transport, without having to lift each individual item.
* Paper towels or fiber cloth.  Toilet or tissue paper won’t work, you’ll end up with it stuck to your newly painted surfaces.
* Large nail file
* Wire cutters or an xacto knife.  Both work, but I’m clumsy and feel more comfortable with clippers.
* Acrylic paint in the colors you want for your finished product.  I used black and bronze gloss.
* Two paint brushes.  Smaller areas or areas that need more detail will need a smaller brush.
* Plastic or latex gloves.  I’m a very messy painter.
* Glossy varnish.  I got a spray can as I find it’s easier to work with.
* An open outdoor area for things to dry.  You do not want to be in the same room as drying varnish.
* A face mask.  You don’t want breathe the fumes from the varnish.

Plastic to Fantastic Barbie Accessory Makeover Set One DIY Before - Pink Barbie Plate, Hair Dryer, and Grey Matte Muffin Tin

Plastic to Fantastic Barbie Accessory Makeover Set One DIY Step One: Remove the Base

I started with a grey, matte muffin tin, a “Barbie pink” plate, and an equally pink hair dryer.

Both the muffin tin and the plate had some kind of plastic protruding from them, I assume this is to hold them in position in official Barbie dioramas, or perhaps allow them to be held by dolls more easily.  Whatever the case, I’m not a fan, so I removed them.  I used the clippers, but I had to be gentle to avoid cracking the items.  Once the larger chunks were removed, I smoothed over the rough area with the nail file.  This is going to cause little plastic bits to cling all over your items, just rinse them and let them dry before continuing.

The next step was where things got really messy; I gave the items a once over on one side with the black, acrylic gloss and set them aside to dry.  For my particular brand of paint it takes about fifteen minutes for them to be all set; not all brands are the same, so be sure to check your container.  Once dried, I could see how uneven the coats were, so I gave each piece a second coat, let them fully dry again, and repeated for the opposite side.

Plastic to Fantastic Barbie Accessory Makeover Set One DIY Step Two: Paint it Black

I wanted the hair dryer to remain a solid black, so I left it to the side for this next part.  My plan for the muffin tin and the plate was to age them bit, making them feel more used and antique.  I dipped my second brush into the bronze gloss and wiped most of it onto a paper towel, pushing the brush down so the bristles splayed in different directions, and continued until there was very little paint left with each stroke.  Then I went over each item quickly, leaving traces of the bronze.  Now, if you feel there’s too much bronze, simply wipe away some of it with a dry paper towel or fiber cloth.  Don’t be too rough, or you could remove more than you intend.

Plastic to Fantastic Barbie Accessory Makeover Set One DIY Step Three: Bronzing

When I was satisfied with the appearance, keeping my gloves on, I took my cardboard to my outdoor area and put on my mask; this is where things get stinky!  The instructions on my varnish may be different than yours, so be sure to read over them.  If you’re also using an aerosol, I suggest a quick, light spray on one side.  I found that I needed to move them right after spraying them, otherwise they stick to the surface where they were sprayed.  Moving them just an inch or so away from the sprayed area should suffice, and you want to move quickly as they’re very sticky, and will adhere to your gloves if you’re not quick enough.  Once re-positioned, leave them to dry fully.  Some varnishes dry at different rates, so be sure to check your container.  Once dried, repeat this step on the opposite side.  If they are sticky, or cling to your gloves at all when you try to rotate them, they’re not done drying.

Plastic to Fantastic Barbie Accessory Makeover Set One DIY Finished Hair Dryer

Plastic to Fantastic Barbie Accessory Makeover Set One DIY Finished Plate

Plastic to Fantastic Barbie Accessory Makeover Set One DIY Finished Muffin Tin

Once fully dry, I ran the pieces under the tap with warm water and a little hand soap.  If you do this, please be gentle, otherwise you may strip off some of your makeover.  As you can see with the plate (above), I was a little too rough when I rinsed it, and had to give it a slight retouch.  Thankfully, it won’t be noticeable in most pictures, as I won’t be zooming in quite so much.

Plastic to Fantastic Barbie Accessory Makeover Set One DIY After

I “tested” this method a few other times, but didn’t think to take “before” pictures to compare them.

Eve’s laptop was upgraded with two coats of black gloss paint, varnish, and a small sticker as the screen.  I debated whether or not to give the outer area a bit of bronze paint for a cool, steampunk vibe, but with the surface being mostly smooth, it probably would have just given highlights to the barbie logo.

DIY Matte Grey Barbie Laptop to sleek Black laptop

I think the end result with the laptop was pretty nice, but it was my second test that sold me on the use of additional colors.  I decided to take a matte, grey Barbie pan and transform it into a cast iron pan.  This was incredibly easy due to the texture inside the pan, and it’s actually my favorite result thus far.  I’m pleased to say I have a lot more where this came from, and I’m going to continue playing around and testing.

DIY Matte Grey Barbie Pan to Cast Iron Pan

I hope you enjoyed this little tutorial.  Did you try this, or do you have any tips for upcycling Barbie goods?  Let me know in the comments below.


  • oooh, nice!

    • Thank you 😀

  • Yes, so much better than before! Good job : )!

    • Thanks 🙂 I’ve got a lot more pieces, I’m just too busy this week to do anything with them. Soon though 🙂

Leave a Reply to mydolladventure Cancel reply